Australian Manufactured
Your Supaboil incorporates patented motion detection Energy Saving technology. These features ensure that the maximum energy efficiency is achieved by monitoring your presence and boiling water usage. The appliance then either reduces the temperature or switches itself off completely. The appliance will wake automatically and be on temperature ready for use when you need it. This will be indicated by the LED illuminating red.
On the odd occasion when you approach your Supaboil in times when you would normally not use it – for example – in the middle of the night, the appliance will sense your presence and will automatically begin heating the water to operating temperature. During this time, the LED will illuminate blue until such time as the water is on temperature, when the LED will then change to red. These patented features deliver exceptional levels of energy saving.
Other features built into the Supaboil are Supakwik's 'Power Management' and 'Supasilent Standby' technology.
The Power Management feature reduces power to the element as the water temperate approaches boiling, preventing the generation of steam, thereby further reducing energy consumption.
During standby when the heater is not used, heatloss occurs reducing the temperature dropping a few degrees, resulting in the water needing to be periodicall re heated. Supakwik's Supasilent standby feature prevents this irritating noise of the water being periodically boiled. This is achieved by the control technology having the ability to react to minute temperature changes of the water, whereby the element is pulsed on for microseconds to maintain the water at delivery temperature.
If the installation includes a filter assembly the filter cartridge must be replaced every 6 to 12 months depending on the level of usage and water quality.
The Supaboil series is available in either white enamel or brushed stainless steel finish in capacities from 20 - 160 cup initial delivery (3 - 25 Litres) and supported by a 2 year warranty on the product and 5 years on the storage vessel.
 |
 |
 |
Model Selection Chart
This Model Selection Chart shows the quantity of cups a specific heater will deliver in a continuous draw off from full to empty, together with first hour delivery.
.jpg)
All models have a nominal recovery rate of 150 cups per hour (160ml cup). Therefore when considering a M..020 model Supaboil, the first hour delivery will be 20 cups + 150 cups = 170 cup. Similarly, when considering the M..160 model Supaboil, the first hour delivery will be 160 cups + 150 cups = 310 cups.
For detailed information on model seclection please refer to the Product Selection on the Products page of this web site.